- Makita Mac 700 Owners Manual 2016
- Makita Mac 700 Owners Manual Instructions
- Makita Mac 700 Owners Manual Online
- Makita Mac 700 Owners Manual Download
Makita Air Compressor Part Breakdown - MODEL MAC700 www.makita.com PB-MKTA-072605 Item Description Part # Qty 37 Electric motor / Crankcase 251215-E 1 38 Exhaust valve seat 114001-E 1 39 Oil gauge gasket 217001-E 1 40 Air tank 401129-E 1 41 Spring washer for motor cover 382004-E 4 42 Regulator 410030-E 1 43 Rubber handle 435017-E 1. Owner's manual; Makita MAC700 Owner's Manual. Oil lubricated air compressor. Dealer’s Name and Address to one of the Makita Factory Service Centers listed, or to an Authorized Makita Service Center. Be sure to attach a Model No. Letter to the outside of the carton detailing the problem Serial No.
MAC700 - 02/04
OWNERS MANUAL FOR
Oil Lubricated Air Compressor
MODEL NO.
MAC700 | MAC2400 | MAC5200
Model No.
MAC700
MAC2400
MAC5200
Horsepower
2
2.5
3
SCFM @ 40 PSIG
3.8
4.8
6.9
SCFM @ 90 PSIG
3.3
4.2
6.5
Cut-In Pressure
100 PSI
100 PSI
110 PSI
Cut-Out Pressure
130 PSI
130 PSI
140 PSI
Bore
47 mm
51 mm
47 mm
Stroke
44
mm
44
Makita Mac 700 Owners Manual 2016
mm
44
mm
Voltage -Single Phase
120
120
120
Motor RPM
1720
1720
3420
Amperage @ max pressure
12.4
12.3
13.8
Tank Size
2.6 Gallon
4.2 Gallon
5.2 Gallon
CSA/US Listed
Yes
Yes
Yes
SPECIFICATION CHART
Minimum Circuit Requirement: 15 AMPS
Makita Mac 700 Owners Manual Instructions
* A circuit breaker is preferred. Use only a fuse or circuit breaker that is the same rating
as the branch circuit the air compressor is operated on. If the air compressor is
connected to a circuit protected by fuses, use time delay fuses.
IMPORTANT:
Read the Safety Guidelines and ALL
Makita Mac 700 Owners Manual Online
instructions carefully before operating.
www.makitatools.com
Makita’s 2.0 HP Air Compressor (MAC700) is equipped with Makita’s Big Bore™ engineered pump cylinder and piston for higher output, less noise and improved jobsite performance. The MAC700 delivers industrial power and results with improved durability for tough job site conditions.
2.0 HP with Big Bore™ Engineered Pump
The MAC700 is powered by a 2.0 HP motor. The Makita Big Bore™ engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC700 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore™ oil-lubricated pump is also more efficient: the MAC700 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise.
The 2.6 gallon tank sustains an operating pressure of 130 PSI, and delivers 40 PSI (3.8 CFM) and 90 PSI (3.3 CFM). The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.
Versatile Design for a Range of Applications
Makita Mac 700 Owners Manual Download
The MAC700 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions.